Operation CHARM: Car repair manuals for everyone.
Home >> Cadillac Truck >> 2008 >> SRX RWD V8-4.6L >> Repair and Diagnosis >> Powertrain Management >> Sensors and Switches - Powertrain Management >> Sensors and Switches - Computers and Control Systems >> Accelerator Pedal Position Sensor >> Service and Repair

Accelerator Pedal Position Sensor: Service and Repair



Accelerator Pedal Position Sensor Replacement

Removal Procedure





1. Remove the left instrument panel (I/P) sound insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side (Left Hand Drive) (Service and Repair)Instrument Panel Insulator Panel Replacement - Left Side (Right Hand Drive) (Service and Repair) .
2. Disconnect the accelerator pedal position (APP) sensor electrical connector.
3. Remove the accelerated pedal bolts (2).
4. Remove the accelerator pedal (1) from the vehicle.



Installation Procedure





1. Position the accelerator pedal (1) to the vehicle.

Notice: Refer to Fastener Notice (Fastener Notice) .

2. Install the accelerator pedal bolts (2).

Tighten the bolts to 5 N.m (44 lb in).

3. Connect APP sensor electrical connector.
4. Install the left I/P sound insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side (Left Hand Drive) (Service and Repair)Instrument Panel Insulator Panel Replacement - Left Side (Right Hand Drive) (Service and Repair) .


pro multis · About Operation CHARM