Operation CHARM: Car repair manuals for everyone.
Home >> Cadillac Truck >> 2012 >> SRX AWD V6-3.6L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> 78. Engine Front Cover Assemble

78. Engine Front Cover Assemble




Engine Front Cover Assemble

Special Tools
* EN 29184 - Oil Seal Installer
* EN 46103 - Camshaft Actuator Valve Seal Installer

For equivalent regional tools, refer to Special Tools Special Tools.





Important: Do not lubricate the crankshaft front oil seal or crankshaft balancer sealing surfaces. The crankshaft balancer is installed into a dry seal.


1. Install the NEW crankshaft front oil seal into the engine front cover using the EN 29184 - installer.




2. Place the seal into position with the notches (1) in the seal down. The notches (1) will face inboard when properly installed.




3. Install the NEW camshaft position actuator valve oil seals into the engine front cover using the EN 46103 - installer.

pro multis · About Operation CHARM