Clutch: Testing and Inspection

1. With engine running and parking brake applied, depress clutch pedal to approximately 1/2 inch from floor mat.

2. Move shift lever between "First" and "Reverse" gears several times. If no gear clashing occurs when shifting into "Reverse," the clutch is releasing fully.

3. If the shifting in Step 2 is not smooth, the clutch is not releasing fully and the linkage should be inspected.

4. Check clutch pedal bushing for sticking or excessive wear.

5. Have an assistant depress the clutch pedal to the floor and observe clutch fork lever travel at transaxle. The end of the clutch fork lever should have a total travel of approximately 1.5 to 1.7 inches.

6. To check the self-adjusting mechanism, depress the clutch pedal and observe if the pawl firmly engages the teeth of the detent.