Reaction Sun Gear & Input Drum

Inspection





1. Inspect reaction sun gear for cracks, splits, damaged spline or journals and plugged lubrication holes.

2. Inspect reaction sun gear bushing for damage or scoring.

3. If necessary, remove input drum to reaction sun gear snap ring and remove sun gear from input drum.

4. Inspect input drum for damage.

5. Inspect 4-tanged input drum to lo and reverse clutch housing thrust washer for reverse clutch housing thrust washer for scoring or distorted tangs.

6. Inspect reaction sun gear to input drum snap ring.

Assembly & installation

1. Install reaction sun gear into input drum with spline side first, and retain with snap ring.

2. Install 4 tanged thrust washers on input drum over sun gear end. Align tangs into input drum and retain with petroleum jelly.

3. Install reaction sun gear and input drum assembly.