Antitheft and Alarm Systems: Service and Repair

Theft Deterrent Module And Relay:

THEFT DETERRENT CONTROLLER AND RELAY

Removal and Installation

1. Disconnect negative battery cable.
2. Remove left-hand sound insulator.
3. Remove electrical connectors. (#8)
4. Disconnect controller and relay assembly (#4 and #7).
5. Remove controller from relay.
6. Install relay (#7) to controller (#4)
7. Install Controller to bracket (#1)
8. Install electrical connectors.(#8)
9. Install left-hand sound insulator.
10. Install negative battery cable.



STARTER INTERRUPT RELAY

Removal and Installation

1. Remove negative battery cable.
2. Remove left-hand sound insulator.
3. Remove electrical connectors (#8) from module (#4) and relay (#7).
4. Remove bracket (#1), relay and module assembly.
5. Remove connector (#11) from relay (#9).
6. Remove starter interrupt relay (#9) from bracket.
7. Install starter interrupt relay to bracket.
8. Install electrical connector to relay.
9. Install bracket to relay.
10 Install electrical connector (#8) to module (#4) and relay (#7).
11 Install left hand sound insulator panel.
12 Reinstall negative battery cable.