Cylinder Block Assembly: Specifications
| Cylinder Bore Diameter (Std.) | see note Note: Nominal cylinder bore diameter, 3.307 inches. Liner protrusion, flush to .0031 inch above block deck. Maximum variation between liners, .0039 inch.Piston & liner are matched set and must be replaced as an assembly if liner protrusion, taper, out of round or piston to liner clearance are not within specifications. |
| Cylinder Bore Taper Max. | 0.0005 Inch (in) |
| Cylinder Bore Out of Round Max. | 0.0008 Inch (in) |