Will Not Hold In Park

1. Check for improperly adjusted manual linkage.

2. Inspect internal linkage for the following:

a. Parking pawl binding in case.

b. Damaged actuator rod, spring or plunger.

c. Broken parking pawl.

d. Loose or damaged parking bracket.

e. Missing or improperly positioned manual shaft to case pin.

3. Inspect inside detent lever and pin assembly for loose nut or worn or damaged hole in lever.

4. Inspect manual detent roller and spring assembly for the following:

a. Roller assembly to valve body bolt loose.

b. Pin or roller damaged, improperly positioned or missing.