M/T - Correction of Fastener Torque

88cad06

Bulletin No. T-88-156
File in Group 7
Number 192
Corp. Ref. No. 817102
Date June '88
SUBJECT: CORRECTION OF SERVICE INFORMATION MANUAL TRANSAXLE MOUNT FASTENER TORQUE VALUES - THM F-7

MODELS AFFECTED: 1987-1988 ALLANTES

FIGURE 7A1-37 - TRANSAXLE MOUNT-RIGHT SIDE:

Two right side transaxle mount fastener torque values indicated in Figure 7A1-37 on page 7A1-31 of the 1987-1988 Allante Service Information Manual are incorrect. Fasteners torqued to the indicated values could result in damage to the transaxle mount. Correct torque values are listed below:

Item Indicated Torque Value Correct Torque Value

#6 Nut 100 N-m/75 ft.lbs. 45 N-m/35 ft.lbs.
#9 Bolt 20 N-m/15 ft.lbs. 56 N-m/42 ft.lbs.

Please note the differences in your manual.