1989-1990 Allantes Procedures

1989-1990 Allantes (Refer to Figures 3 and 4):

1. Remove cap from the fuel vapor canister fresh air vent and discard. Refer to Figure 4.

2. Insert vent cap, P/N 8640496, into one end of hose using hose material, GM 6165-M, 20.5" long, 5/16" I.D. Refer to Figure 3.

3. Install open end of hose over the canister fresh air vent and clamp with a hose clamp. Refer to Figure 4.

4. Route the hose through the air cleaner support. Refer to Figure 4.





5. Attach free end of hose to hole in lower fan support using clip, P/N 3866187, and screw, P/N 11514845. Refer to Figure 3.


Part Number 7021697 is expected to be available on March 16, 1992. In case of limited inventory, parts will be placed on 400 control to waive VIP surcharges. Only verifiable emergency VIP orders will be acccpted. SPO will make every effort to obtain parts. However, the part will be shipped premium transportation at dealer's expense, and all other order types will be placed on back order until the 400 control is removed.

Parts are currently available from GMSPO.

For warranty purposes use Labor Operation T6480 at .2 hour.