With Plastic Deflector

Waterproof clear plastic deflector is used to seal the door inner panel and prevent entry of water into the body. The deflector is secured to the door inner panel with pressure sensitive tape located on the outboard surface of the deflector. This allows the deflector to be peeled back as needed to service door components.


REMOVE OR DISCONNECT
1. Door trim panel
2. Armrest support brackets and any other items (if installed over water deflector) seat belt retractor require removal.
3. Water deflector by peeling deflector off door inner panel.


INSTALL OR CONNECT
1. Water deflector to door inner panel, making sure tabs of deflector are installed in door inner panel drain slots.
2. Armrest support brackets and any other items (if installed over water deflector).
3. Door trim panel.