Seats - Back Cushion Tilted Outboard
88cad04Bulletin No.: T-88-118
File in Group: 10
Number: 127
Corp. Ref. No.: 811604
Date: April '88
SUBJECT: FRONT SEAT BACK CUSHION TILTED OUTBOARD
MODELS AFFECTED: 1985-1988 DE VILLES AND FLEETWOODS
This bulletin supersedes bulletin T-87-86, Group 10, which should be destroyed.
Some 1985-1988 DeVilles and Fleetwoods may experience a condition of front seats leaning outboard. To repair this condition, use the following procedure:
1. Raise seat to full up position.
FIGURE 1 - REAR VERTICAL GEAR NUT:
FIGURE 2 - DISCONNECTING DRIVE CABLE:
2. Disconnect drive cable from rear vertical gear nut on inboard side, refer to Figures 1 and 2.
3. Move rear tilt down, using the door-mounted control switch, until seat is no longer leaning.
4. Reconnect drive cable.
For warranty purposes use Labor Operation T6299 for the right side and T6315 for the left side at .4 hour each.