Service Procedure and Credit

1. Remove the Body Control Module (BCM) and the BCM E-PROM in accordance with the Service Procedure in Section 8C of the 1986/1987 Cadillac Service Information Manual - Eldorado and Seville.

2. Install new service E-PROM into the E-PROM socket of the BCM (Refer to Section 8C; 1986/1987 Cadillac Service Information Manual - Eldorado and Seville).

3. Install BCM onto vehicle in accordance with the above stated procedure.

4. Install the Campaign Completion Label on a clean, dry surface of the radiator support tie bar.

CREDIT

Credit for this campaign will be issued upon receipt of a properly prepared warranty claim which includes information from one of the following Labor Operations:

Failed Parts Failure Labor Labor*
Description Part No. Allowance Code Operation Hours

Replace Calibrator (E-PROM)

1986 Eldorado or 1228483 *** 96 V3910 .4
Seville

1987 Eldorado or 16075605 *** 96 V3910 .4
Seville

* This labor time represents the actual time required to perform the correction.
Dealers should apply for 0.1 additional hour for administrative allowance as "Other Labor Hours".

*** The parts allowance should be the total of the current GMSPO net plus 30% for the part (E-PROM) required for this repair.