Ignition Lock Cylinder

Fig. 1 Lock cylinder removal:

1. Remove steering wheel as outlined under ``Steering Wheel, Replace'' procedure.
2. Remove turn signal switch as outlined under ``Turn Signal Switch, Replace'' procedure.
3. Remove buzzer switch.
4. Turn lock cylinder to ``Run'' position, then remove lock cylinder retaining screw and the lock cylinder, Fig. 1.
5. To install, rotate lock cylinder to the stop while holding housing. Align cylinder key with keyway in housing, then push lock cylinder into housing until fully seated.
6. Install lock cylinder retaining screw.
7. Install buzzer switch, turn signal switch and steering wheel.