Troubleshooting Hints

TROUBLESHOOTING HINTS

^ Try the following checks before doing the System Check.

1. Check Fuse 12 by visual inspection.
2. Check Fuse 7 by operating Rear Defogger.
3. Check that the Electronic Level Control (ELC) Height Sensor connector is properly secured.
4. Check that the link is properly secured to the Actuator Arm and the Actuator Arm is not bent or damaged.
5. If the CAR IS LEVELING Indicator lights but the compressor does not run, the ELC Relay and the ELC Height Sensor are OK. Check wiring to compressor and the compressor.
6. If the CAR IS LEVELING Indicator does not light when the compressor is operating check the DK GRN (322), BLK (151) wires to the RH Information Center, bulb and printed circuit.

^ Refer to System Check for a guide to normal operation.
^ Refer to System Diagnosis for diagnostic tests.