Lock Cylinder

Installing Door Lock Cylinder:

REMOVE OR DISCONNECT

IMPORTANT
^ Glass must be in the full-up position.

1. Trim panel.
2. Water deflector.
3. Rod.
4. Connector, if present.
5. Any wire harnesses present.
6. Retainer using a flat-bladed tool.
7. Cylinder.

INSTALL OR CONNECT
1. Gasket over cylinder.
2. Cylinder (including any wire harnesses that may be attached).
3. Retainer.
4. Connector, if present.
5. Any other wire harnesses, if present.
6. Rod.
7. Water deflector.
8. Trim panel.