E060

2nd Gear Pressure Switch Circuit:

DESCRIPTION:

Code E060 will set if the cruise control is engaged and the Park/Neutral switch is closed, indicating the transmission is in Park or Neutral.

The primary purpose of this code is to detect an action of the drive that could cause an unsafe condition or damage to the vehicle. This code can be driver induced by shifting the gear selector into Neutral when the cruise control is engaged. A failure of the PRNDL switch may cause the code to set. Check for code E091.

TEST CONDITIONS:

1. Cruise control enabled.
2. Cruise control engaged.

FAILURE CONDITIONS:

Transmission in Park/Neutral.

ACTION TAKEN:

1. Disengage cruise control.

NOTE ON INTERMITTENTS:

If code E060 is stored as an intermittent code, check the operation of the Park/Neutral input test. After selecting data ED71 and ED72, manipulate affected wiring while observing the status of the switch. If the switch changes status while the wiring is being manipulated, repair the intermittent connections. If no trouble is found, explain to the customer that this code can be induced if the transmission is inadvertently put into neutral while the cruise control is engaged.