Test G: Alarms Sound With No Tamper Input

Test G - Table 1:

Test G - Table 2:

G: ALARMS SOUND WITH NO TAMPER INPUT

1. Arm System.

^ If there is a false alarm, go to step 2.

^ If there is not a false alarm check the condition of the Door Jamb Switches. If contacts are too close together, moisture may cause a false alarm. Check WHT/BLU (263) wires for intermittent shorts to ground.

2. With alarms sounding, disconnect Theft Deterrent Module connector.

^ If alarms stop, go to Table 2.

^ If alarms continue, go to Table 1.