Seats - Back Release Handle Difficult to Operate

Bulletin No.:
T-92-82

File in Group:
10

Number:
255

Corp. Ref. No.:
211607

Date:
April, 1992


SUBJECT:
SEAT BACK RELEASE HANDLE DIFFICULT TO OPERATE

MODELS AFFECTED:
1987-1992 ALLANTES


Some 1987-1992 Allantes may experience a condition of the seat back release handle being difficult to operate. This condition may be caused by a misadjusted seat release handle.

To repair this condition use the following procedure:

1. Remove the seat back cover. Refer to page 10-10-3 of the 1991/1992 Allante Service Information Manual.





2. Loosen locknut. Refer to Figure 1.


3. Tighten or loosen adjustment nut to obtain desired release handle effort. Refer to Figure 1.

4. Tighten locknut.

5. Install seat back cover.

For warranty purposes use Labor Operation T6592 at .3 hour.