Troubleshooting Hints

^ Try the following checks before doing the System Check.

1. Check Fuse 3 by visual inspection.

2. Check Circuit Breaker 24 by operating the Hard Top/Soft Top Pull-Down Motor.

3. Check Fuse 20 if both Outside Mirrors do not operate properly.

4. Check ground G200 by observing that the Glove Box Light operates normally.

5. Check ground G201 by observing that the Blower Motor operates normally.

6. Check ground G300 by operating the Power Antenna.

^ Go to System Check for a guide to normal operation.

^ Go to System Diagnosis for diagnostic tests.


SYSTEM CHECK

^ Use the System Check Table as a guide to normal operation.

^ Refer to System Diagnosis for a list of symptoms and diagnostic steps.