Troubleshooting Hints - Power Windows

^ Try the following checks before doing the System Check.


1. With the Ignition Switch in RUN, check the associated RAP circuitry to splice 8232 by releasing the Trunk Lid.

2. Check ground G200 by observing the Glove Box Light.

3. If an Express Down function does not operate at a window, check for battery voltage between terminals A and C of the suspect Express Down Window Module while pressing the window switch. If OK, replace suspect Express Down Window Module.

4. Always check terminal contact before replacing any component.

^ Go to System Check Table for a guide to normal operation.

^ Go to System Diagnosis for diagnostic tests.

SYSTEM CHECK

^ Use the System Check Table as a guide to normal operation.

^ Refer to System Diagnosis for a list of symptoms and diagnostic steps.