Washer System

Try the following checks before doing the System Diagnosis.

1. Check Fuse 10 by visual inspection.

2. Check Fuse 6, WHT (93) wire and G200 by operating the Wipers.

3. If the Washer does not operate, check that:

^ Washer reservoir is filled.

^ Hoses are not pinched or kinked.

^ Hoses are correctly attached.

^ Nozzles are not clogged.

4. If the Headlights are sprayed once when the Ignition is turned on, check the Headlight Washer Switch in the Right Switch Pod.

5. If the Headlights are washed continuously, replace the Headlight Washer Module. Go to System Diagnosis for diagnostic tests.