Instrument Cluster Replacement

Fig. 15 Upper trim pad assembly. DeVille & Fleetwood:

Fig. 16 Cluster removal. DeVille & Fleetwood:

Disable Supplemental Inflatable Restraint (SIR) System. Refer to Air Bags and Seat Belts.
1. Disconnect battery ground cable.
2. Remove upper trim pad as follows:
a. Remove A/C outlets from upper trim pad.
b. Remove screws locations 2 and 3 from both side of pad, Fig. 15.
c. Remove upper trim pad.
3. Remove screw (88) and plate (87), Fig. 16.
4. Remove cluster attaching screws.
5. Disconnect wiring from rear of cluster and remove cluster from vehicle.
6. Reverse procedure to install.