Steering Wheel: Service and Repair

Fig. 18 Inflator Module Assembly:

1. Disable airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.
2. Remove module retaining screws from back of steering wheel.
3. Remove module from steering wheel, then disconnect horn contact, by pushing slightly and twisting counterclockwise.
4. Remove connector position assurance, then disconnect coil assembly connector, Fig. 18.
5. Remove steering wheel retaining nut.
6. Using suitable steering wheel puller, remove wheel.
7. Reverse procedure to install.
8. Rearm airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.