BCM Interface

BCM Interface Wiring Detail (1 of 3):

2A9 = CPS Ground
1D15 = CPS Ground
1C12 = CPS Wake-Up
1C10 = Conditioned 12 Volt
1C15 = 7 Volts
1C16 = 7 Volts
3C12 = Front/Drive Door Ajar
3C14 = Rear/Passenger Door Ajar
3C7 = Door Handles
3C8 = Door Jambs
1C5 = CCR Fault
2A4 = Washer Fluid Level
3D11 = Generator Field +
3D15 = Generator Enable
3C15 = Trunk Open Input
1D14 = Sensor Ground
3D8 = Twilight Photocell
2A2 = In-Car Temperature
3C6 = Sunload Sensor
3D4 = A/C Low Temperature
3D5 = A/C High Temperature
3D14 = Outside Air Temperature

BCM Interface Wiring Detail (2 of 3):

1D12 = Courtesy Enable
1D11 = Hi Beam Enable
1D9 = Twilight Relay Controls
1D13 = RAP Enable

BCM Interface Wiring Detail (3 of 3):

2A12 = Inc. Dim Output
2A11 = Radio Dim Output
2B4 = Twilight Delay Input
3D12 = Instrument Panel Dim Input
2A5 = Courtesy Enable
2B7 = Parklamp Enable
1D16 = 5 Volt Reference
1D14 = Sensor Ground
1D4 = Mix Door Feedback
1D10 = Blower Speed Control
2B5 = Data Line (UART)
3D10 = Data Line (UART)
1D7 = Ignition-3 Input
3C9 = Time Of Day Wake-Up
1C9 = Crank
3D16 = Low Refrigerator Pressure
2B3 = VSS Input
3C11 = Ignition 1
2B8 = Fuel Level
1C6 = Daytime Running Light Control