P060

DTC P060:

Transaxle Pressure Switch Circuit:

CIRCUIT DESCRIPTION:
Code P060 will set if the cruise control is engaged and the transaxle pressure switch is indicating that the transaxle is in PARK or NEUTRAL.

TEST CONDITION(S):
1. Cruise control enabled.
2. Cruise control engaged.

FAILURE CONDITION(S):
Transaxle pressure switch input to the PCM indicating transaxle in PARK or NEUTRAL.

ACTION TAKEN:
PCM disengages cruise control.

NOTES ON FAULT TREE:
1. Checking if Code P028 or P091 are set because they can cause P060 to set.
2. Checking if the PARK/NEUTRAL input to the PCM from the transaxle range switch agrees with the transaxle pressure switch. If they agree the transaxle was in PARK/NEUTRAL at code set, the code was driver induced by shifting into PARK/NEUTRAL while cruise control was engaged. If they differ, check for an intermittent fault.