Part 2 of 2

DTC P094:

Shift Solenoid Circuit:

CIRCUIT DESCRIPTION:
This diagnostic test checks for a transaxle shift "A" solenoid problem by monitoring the commanded gear verses the transaxle gear ratio. If the gear ratio falls outside of the range for a given gear, Code P094 will set.

NOTES ON FAULT TREE:
8. Checking CKT 581 for a short to voltage inside transaxle.
9. Checking CKT 1222 for a short to voltage from C111 to PCM.
10. Possible causes of getting 4th gear when 3rd gear is commanded.
11. Possible causes of getting 3rd gear when 4th gear is commanded.
12. Possible causes of getting 2nd gear when 1st gear is commanded.
13. Possible causes of getting 1st gear when 2nd gear is commanded.