P096

DTC P096:

Brake Switch Circuit:

CIRCUIT DESCRIPTION:
This diagnostic test checks for unusually large throttle position at low vehicle speed with the brake being applied. The primary purpose of this code is to record snapshot data and alert the driver that this driving condition could damage the vehicle drivetrain or create an unsafe condition. If such a driving condition exists, Code P096 will set.

TEST CONDITION(S):
Codes P021, P022 and P024 not set.

FAILURE CONDITION(S):
1. Brake applied.
2. Transaxle in DRIVE or REVERSE.
3. Vehicle speed 5 mph or less.
4. Throttle position 65 degrees or greater for 12 seconds.

ACTION TAKEN:
PCM turns "ON" the "SERVICE ENGINE SOON" MIL.