| Control Valve and Manifold to Steering Gear Attaching Screws | 78 Inch Pound-Force (in.lb) |
| Cooler Mounting Bolt | 71 Inch Pound-Force (in.lb) |
| Filter Fittings to Outlet Hose | 20 Foot Pound-Force (ft.lb) |
| Frame to Underbody Bolts | 76 Foot Pound-Force (ft.lb) |
| Intermediate Steering Shaft Pinch Bolt | 35 Foot Pound-Force (ft.lb) |
| Outet Tie Rod Lock Nut | 52 Foot Pound-Force (ft.lb) |
| Power Steering Gear Inlet Hose Fitting to Pump | 20 Foot Pound-Force (ft.lb) |
| Power Steering Gear Outlet Hose Clamp to Pump | 15 Inch Pound-Force (in.lb) |
| Power Steering Gear Hose Fitting to Steering Gear | 20 Foot Pound-Force (ft.lb) |
| Power Steering Pressure Switch | 8 Inch Pound-Force (in.lb) |
| Power Steering Pump Mounting Bolts | 18 Foot Pound-Force (ft.lb) |
| Reservoir Mounting Bolts | 44 Inch Pound-Force (in.lb) |
| Retainer Bolt | 30 Foot Pound-Force (ft.lb) |
| Retainer Nut to Engine Block Stud | 30 Foot Pound-Force (ft.lb) |
| Shield Bolts | 71 Inch Pound-Force (in.lb) |
| Steering Gear Mounting Bolts | 35 Foot Pound-Force (ft.lb) |
| Tie Rod Ends To Knuckle Nut (Tighten nut for cotter pin alignment) | 35 (52 ft. lb. max.) Foot Pound-Force (ft.lb) |