Chart 8 Rear A/C Blower Speed Incorrect

Diagnostic Chart:

Wiring Diagram:

CIRCUIT DESCRIPTION

Power from fuse is applied to blower and ground is supplied through the switch. The blower speed is controlled by varying the circuit amperage using a series of three resistors contained in a module. The Air Conditioning Programmer (ACP) receives a feedback signal but has no bearing on rear blower operation.

TEST DESCRIPTION

Numbers below refer to circled numbers on the diagnostic chart.

1. This step checks for poor ground or poor feed circuit.

2. This step determines if resistor module is faulty.

3. This step defines a faulty circuit or faulty switch assembly.