Throttle Valve Cable (With V4U Coach Builder Option)

Setting of the cable must be done by rotating throttle body injector throttle lever at the throttle body. Do not use accelerator pedal to rotate throttle body injector throttle lever.

1. Stop engine, then remove air cleaner.

2. Depress and hold down readjust button at engine end of TV cable assembly.

3. Move slider Fig. 39 rearward until it stops.

4. Release adjust button, then rotate throttle body injector throttle lever to its -full-travel position.-

5. Slider must move toward throttle body injector lever assembly when injector throttle lever is rotated to its -full-travel position.-

6. Install air cleaner, then ensure cable moves freely after engine has been warmed up.