RAP Feature Won't Deactivate When Opening Doors

Retained Accessory Power (RAP) Test A: Door(s) Mini Wedge Input Test Table 1:

Retained Accessory Power (RAP) Test A: Door(s) Mini Wedge Input Test Table 2:

PROCEDURE
Perform mini-wedge tests found in the images.

NOTE: To perform the Mini Wedge Input Test, it will be necessary to install a Tech 1 at the DLC using mass storage cartridge #3000003.
If upon using the Tech 1, the Door Mini Wedge Input Display stays at the same state, with no change displayed when shutting or opening the door(s), this condition will have to be repaired first before testing the Door Mini Wedge inputs.

"OPEN" = Door is open, thus Mini Wedge Switch is grounded.
"CLOSE" = Door is shut, thus Mini Wedge Switch is open.

Remove relay(s) and check for stuck contacts. Replace defective relay(s). Check for short to B+ in CKTs 70 & 241. If OK, replace CCM.