Dual Pole Arming Sensor

Use extreme caution when handling an airbag system sensor. Striking an airbag sensor could cause system deployment, resulting in personal injury and/or improper airbag system operation. All sensors and mounting bracket bolts must be properly tightened to ensure proper operation.


1. Disarm airbag system as described under ``Airbag System Disarming.''
2. Remove accelerator pedal assembly.
3. Disconnect connector position assurance (CPA) and electrical connector.
4. Loosen fasteners from dual pole arming sensor.
5. Remove dual pole arming sensor.
6. Reverse procedure to install, noting the following:
a. Tighten to specifications.
b. Rearm airbag system as described under ``Airbag System Arming.''