Seat Adjusters, Front - Popping Noise

Bulletin No.: T-93-102
File in Group: 10
Number: 291
Corp.Ref.No.: 331027
Date: June, 1993

SUBJECT:
POPPING NOISE ON FRONT SEAT ADJUSTERS

MODELS AFFECTED:
1993 FLEETWOODS (RWD)

Some owners of 1993 Fleetwoods (RWD) may comment on a popping noise from the driver and/or passenger front seat adjusters. This is due to excess play in the scissor arm attaching studs of the adjuster assembly.





To correct this condition install a 1/2 inch "E" clip, P/N 9418771, on the stud shoulder side of each scissor arm attaching stud. There are two scissor arm attaching studs per seat. Refer to Figure 1.

This procedure should be performed on both passenger and driver seats in a vehicle exhibiting this condition.

Parts are currently available from GMSPO.

For warranty purposes use Labor Operation T3334 at .2 hour to install four "E" clips per vehicle.