Forward Sensors

Left Sensor

1. Disarm airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DEACTIVATION.
2. Disconnect connector position assurance and sensor electrical connector.
3. Remove two sensor bolts and sensor.
4. Reverse procedure to install. Refer to SPECIFICATIONS/TIGHTENING SPECIFICATIONS for torque values.
5. Rearm airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM ACTIVATION.

Right Sensor

1. Disarm airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DEACTIVATION.
2. Remove cruise control servo unit.
3. Remove two bolts retaining A/C accumulator bracket.
4. Remove screws retaining coolant reservoir to A/C accumulator bracket and wheelwell.
5. Move insulation on shock tower aside. Sensor connector should be visible.
6. Disconnect connector position assurance and sensor electrical connector.
7. Remove two sensor bolts and sensor.
8. Reverse procedure to install. Refer to SPECIFICATIONS/TIGHTENING SPECIFICATIONS for torque values.
9. Rearm airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM ACTIVATION.