| Standard Hours | Manufacturer Warranty Hours | Skill Level | Notes |
| Replace |
| One Cylinder |
| Right Bank | 10.8 | 7.9 | A | Includes: R&I Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| Left Bank | 10.8 | 7.8 | A | Includes: R&I Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| Both Banks | 13.7 | 9.5 | A | Includes: R&I Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| All Cylinders |
| Right Bank | 12.7 | 9.1 | A | Includes: R&I Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| Left Bank | 12.7 | 9.0 | A | Includes: R&I Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| Both Banks | 16.7 | 11.9 | A | Includes: R&I Cylinder Head & Oil Pan, Hone Cylinder Walls And Plastigage Bearings. |
| Note |
| To Replace Main Bearings, Add | 1.4 | 1.0 | A | |
| To Renew Piston, Pin or Connecting Rod, Add |
| One | 0.2 | 0.0 | A | |
| Each Additional | 0.1 | 0.0 | A | |
| All | 0.9 | 0.0 | A | |
| To Grind Valves, Add |
| One Bank | 1.1 | 0.8 | A | |
| To Renew Timing Gear | 1.4 | 0.0 | A | |
| To Renew Oil Pump, Add | 0.9 | 0.0 | A | |
| To Renew Timing Chain, Add | 1.4 | 0.0 | A | |
| Tune-Up, Add | 0.9 | 0.0 | A | |