Clearing Diagnostic Trouble Codes
On-Board Diagnosis Chart - Basic Operation:
PCM CLEAR CODES
The Powertrain Control Module (PCM) clear codes option may be used to clear stored PCM trouble codes. When selected, the PCM Clear Codes option immediately erases all codes stored up to that point and causes the Driver Information Center (DIC) to display "PCM Codes Clear." Once a problem has been corrected, it is a good idea to clear codes so that any future service work is not needlessly confused.
To Clear Codes:
1. Enter diagnostics by pushing the "OFF" and "WARMER" buttons simultaneously.
2. Wait for "PCM?" to be displayed and then hit the "HI" button.
3. Once "DATA" is displayed push the "LO" button until "CLEAR CODES" is displayed.
4. When "CLEAR CODES" is displayed push the "HI" button and the codes will be cleared.