Remove Control Valve Body

Control Valve Body To Channel Plate Bolts.:

Control Valve to Channel Plate Bolts and Torques

Removing Control Valve Assembly, Spacer Plate And Gaskets, Solenoid Screens, Checkballs, Dowel Pin Sleeves And Oil Pump Shaft.:

Removing Control Valve Assembly

Checkball Locations.:

Checkball Locations



REMOVE OR DISCONNECT


- Case side cover.

- Wiring harness as needed.

- Oil pump.

- Valve body to channel plate bolts.

- Valve body, leaving spacer plate with the transaxle.

- Spacer plate and gasket, if needed.
NOTE: For checkball locations refer to Figure.

CAUTION: Do not use impact type tools on the valve body or pump assembly.