Ignition Cable: Service and Repair

Distributor/Ignition Cable Location:

REMOVE OR DISCONNECT
1. Spark plug wires at distributor cap.
2. Spark plug wires at spark plugs.

CAUTION: Use care when removing spark plug boots from spark plugs. Twist the boot 1/2 turn before removing and then PULL ON THE BOOT ONLY to remove it. DO NOT PULL ON THE WIRE as this may damage the spark plug wire.

3. Spark plug wire channel from front valve cover.
4. Spark plug wires from rear valve cover.
5. Spark plug wire assemblies from vehicle.

INSTALL OR CONNECT
1. Spark plug wire into vehicle.
2. Spark plug wires onto rear value cover.
3. Spark plug wire channel onto front value cover.
4. Spark plug wires at spark plugs.
5. Spark plug wires at distributor cap.