Ignition Switch

Fig. 5 Ignition & Dimmer Switch Replacement:

Fig. 6 Disconnecting Dimmer Switch From Bulkhead Connector:

WARNING:
On models equipped with Airbags, Refer to Air Bags (Supplemental Restraint Systems) Service and Repair Disarming procedures before performing any repair. Service and Repair

1. Remove steering wheel. Refer to Steering and Suspension / Steering / Steering Wheel.
2. Remove turn signal switch. Refer to Lighting and Horns / Turn Signals / Turn Signal Switch. Service and Repair
3. Refer to Fig. 5 to remove ignition and dimmer switches.
4. Refer to Fig. 6 to disconnect dimmer switch from bulkhead connector.
5. When installing dimmer switch, depress switch slightly to install a 3/32 inch twist drill. Force switch upward to remove lash and tighten retaining screw.