Disable/Enable Traction Control

DISABLE/ENABLE TRACTION CONTROL SYSTEM
The Traction Control System (TCS) can be disabled by removing fuse "A1" from the trunk compartment fuse block. A Diagnostic Trouble Code (DTC) will be set and must be cleared before normal TCS operation can continue. Fuse Block

PCM OVERRIDE - PS24
The "Traction Control Disable - PS24" may be used to temporarily disable traction control. When PS24 is selected, the display will alternate between "---" and the current state of traction control disable ("99" for override ON and "00" for override OFF). Pressing the WARMER button will disable traction control for the next eleven cycles and display "99". The "TRACTION DISABLED" message will be displayed for the duration of this override and DTC 73 will be set. Pressing the COOLER button will allow normal program control of traction control and display "00". Testing and Inspection