Instrument Cluster / Carrier: Service and Repair

Fig. 9 Instrument Cluster Removal:

1. Remove fuses A5 and B5 from rear compartment fuse panel and fuse A3 from engine compartment fuse panel.
2. Using a small flat-bladed tool, remove defroster grill.
3. Remove sunload and headlamp auto control sensors from defroster grill.
4. Remove three upper trim panel retaining screws, through defroster grill opening.
5. Remove heater and A/C vents from instrument panel.
6. Remove four upper trim panel retaining screws, through vent openings.
7. Remove upper trim panel.
8. Disconnect two electrical connectors from top of instrument panel.
9. Remove four instrument cluster to instrument panel attaching screws, Fig.9 .
10. Raise cluster, remove two screws securing PRNDL mechanism on digital clusters.
11. Remove instrument cluster.
12. Reverse procedure to install.