Chart A: Door Mini Wedge Tests

Test A: Doors Mini Wedge Input Test-Table 1 & 2:

MINI WEDGE INPUT TEST
To perform the Mini Wedge Input Test, it will be necessary to install a Tech 1 at the DLC using mass storage cartridge #3000003.
If upon using the Tech 1, the Door Mini Wedge Input Display stays at the same state, with no change displayed when shutting or opening the door(s), this condition will have to be repaired first before testing the Door Mini Wedge inputs.

"OPEN" = Door is open, thus Mini Wedge Switch is grounded.
"CLOSE" = Door is shut, thus Mini Wedge Switch is open.