Ignition Control Module: Service and Repair

Ignition Coil Assembly:

Coil And Coil Module Removal And Installation:

DISASSEMBLE

NOTE: Numbers included in this procedure refer to caption numbers in the included images.

1. Ignition control module (11).

ASSEMBLE

NOTE: A package of silicone grease is included with a new ignition control module. This grease is necessary for ignition control module cooling.

1. Spread silicone grease on metal face of ignition control module (11) and on bracket (13) where it seats, and position ignition control module (11) to bracket (13).
2. Bolts/screws (12). Tighten bolts/screws (12) to 1.7 Nm (15 lb in).