Manifold Pressure/Vacuum Sensor: Service and Repair

Top Front Of Engine:

MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR

REMOVE OR DISCONNECT
1. Negative battery cable.
2. Resonator.
3. Electrical connector.
4. Hold down bolts (2).
5. MAP sensor from intake manifold.

INSTALL OR CONNECT
1. New MAP sensor seal (lightly coated with clean engine oil).
2. MAP sensor to intake.
3. Hold down bolts. Tighten bolts to 6 Nm (50 lb in).
4. Electrical connector.
5. Resonator.
6. Negative battery cable.