Reprogramming Control Functions
As optional equipment the vehicle many have a sunroof. The electrically controlled sunroof is adjustable and has a transparent glass top with a tilting feature. There is a pinch guard protector built into the system. Preselection switch (rotary knob) allows the glass panel to be adjusted to any position. If the preselection switch (rotary knob) is actuated while the glass panel is moving or if several adjustment changes are made on the preselection switch (rotary knob) immediately after one another, the glass panel obeys the last command only. If the preselection switch (rotary knob) is turned past the glass panel closed position before another position, the glass panel goes to last selected position without first closing.When the battery is disconnected or power is lost to the programmer, these steps must be followed to reprogram the sunroof. If after programming, the sunroof opens again each time it is Closed, the reprogramming procedure must be repeated, up to three times.
^ Ignition in RUN position.
^ Place preselection switch (rotary knob) in the closed position and press in on switch for 3 seconds after glass panel closes.
^ Place preselection switch (rotary knob) in the Vent position and press in switch and hold for seconds after glass panel reaches Vent position.
^ Place preselection switch (rotary knob) in the Full Open position and press in on switch and hold for 3 seconds after glass panel reaches Full Open position.
^ Place preselection switch (rotary knob) in the Closed position and press in on switch for 3 seconds after glass panel closes.