Cylinder Head Disassemble
- Tool Required- J 8001 Dial Indicator Set
- J 9666 Valve Spring Tester
- J 8062 Valve Spring Compressor
- J 41774 Valve Spring Compressor Adaptor
- J 42096 0.075 OS Valve Guide Reamer
- Or Equivalents
1. Remove the lifters. Place the lifters sequentially in rack so they can be installed in their original order, if being reused.
2. Use Valve Spring Compressor and the Valve Spring Compressor Adapter to compress the valve springs.
3. Remove the valve stem keys (2).
4. Remove the cap (3) from the valve stem.
5. Remove the valve spring (4).
6. Remove the valve seal (5).
7. Remove the valve spring seat (6) from the cylinder head.
8. Remove the valves (7). Place the valves sequentially in a rack so they can be installed in their original order, if being reused.