Evaporative Emission Control Canister: Service and Repair

EVAP Canister:

Removal Procedure

Notice: Numbers in text in parenthesis correspond to numbered components in image.

1. Disconnect the Negative battery cable.

Caution: Refer to Battery Disconnect Procedures under Powertrain Management / Service Precautions.

2. Loosen the fuel filler cap in order to relieve the system pressure.

3. Raise and support the vehicle.

4. Remove the right front inner fender well.

5. Disconnect the quick connect fittings from the EVAP canister (4).

^ The EVAP Purge line (1).

^ The EVAP Vent line (2).

^ The EVAP Vapor line (3).

6. Remove the mounting bolts from the EVAP canister.

7. Remove the EVAP canister.

Installation Procedure

1. Install the EVAP canister (4).

2. Install/tighten the mounting bolts.

3. Reconnect the quick connect fittings to the EVAP canister.

^ The EVAP Purge line (1).

^ The EVAP Vent line (2).

^ The EVAP Vapor line (3).

4. Install the right front inner fender well.

5. Lower the vehicle.

6. Reconnect the negative battery cable.

7. Tighten the fuel filler cap.