Shift Indicator - A/T: Service and Repair
REMOVAL PROCEDUREShift Indicator: Removal Procedure:
1. Remove the gear selector boot from console. The boot snaps into console and can be removed by gently pulling on front end of boot.
2. Remove the connector from indicator.
3. Dislodge the indicator from console by reaching under console opening near gear selector.
IMPORTANT: Do not pry the indicator from console as damage to console trim may occur.
4. Remove the indicator.
INSTALLATION PROCEDURE
Shift Indicator: Installation Procedure:
1. Install the indicator to console making sure to fully seat.
2. Install the connector to indicator.
Install the gear selector boot to console by snapping into place.