Reveal Molding Retainer Replacement (Front)

Reveal Molding Retainer Replacement (Front): Removal Procedure:

REMOVAL PROCEDURE
1. Remove windshield reveal molding.
2. Use a plastic tool to assist in pushing away from the window while working it out the pinchweld to remove the reveal molding retainers from the following sides of the windshield:
^ From the upper side of the windshield.
^ From the lower side of the windshield.
^ From the left side of the windshield.
^ From the right side of the windshield.
^ Refer to Windshield Replacement if the reveal molding retainers become damaged.

INSTALLATION PROCEDURE

Reveal Molding Retainer Replacement (Front): Installation Procedure:

1. Install the reveal molding retainers to the following sides of the windshield:
^ To the upper side of the windshield.
^ To the lower side of the windshield.
^ To the left side of the windshield.
^ To the right side of the windshield.

IMPORTANT: Remove the windshield if the windshield reveal molding retainers cannot be properly installed due to the windshield fit or due to urethane interference. Refer to Windshield Replacement.

2. Install windshield reveal molding. Refer to Windshield Reveal Molding Replacement.