Memory Mirror System

The memory seat and mirrors system automatically returns the LH seat to one of four preset positions: MEMORY 1, MEMORY 2, EXIT 1, and EXIT 2. The memory seat and mirrors system consists of the Memory Seat Module (MSM) and the Memory Mirror Module (MMM). There are motors for the seat, lumbar support, and mirrors with a position sensor attached to each motor. The Memory Seat Module (MSM) controls the movement of the three seat position motors, the two lumbar support motors, and one seat back recline motor. The Memory Mirror Module (MMM) controls the movement of the four mirror motors, two for the LH mirror and two for the RH mirror. All the motors operate independently of each other.

The Trunk Compartment Fuse Block BATT Fuse via CKT 1840 (ORN) supplies battery voltage (B+) to power the Memory Seat Module (MSM) and the LH MaxiFuse(R) Block SEAT Circuit Breaker via CKT 742 (RED) provide battery voltage (B+) to the Memory Seat Module which is used to run the seat motors. Ground for the MSM is provided via CKT 850 (BLK) to ground G302.

The Engine Compartment Fuse/Relay Center MIRROR Fuse via CKT 1740 supplies battery voltage (B+) to power the Memory Mirror Module (MMM) and the mirror motors. Ground for the MMM is provided via CKT 50 (BLK) to ground G204.